Domino DF 500 Mortise and Tenon Joiner - 574332

Joining has always been a slow, difficult process. Never again, thanks to the Festool Domino joining system. The system consists of the Domino joiner and pre-fabricated, beech and sipo Domino tenons. The Domino joiner, with its revolutionary cutting method, simple indexing features and adjustable mortise sizing, makes flawless mortises every single time. The Domino tenon is equally as impressive - it is 100% rotation-proof and far stronger than either biscuits or dowels. It also has a large gluing surface area for extra strength.

Please note that the Domino DF 500 can be purchased as a set, which includes the optional trim and cross stop. See purchasing options below.

  • Unique, patented cutting action that rotates and oscillates to create perfect, clean, and repeatable mortises every time.
  • Mortise width adjustment with the turn of a dial allows for easier alignment when joining panels.
  • Pivoting Fence allows you to create angled mortises from 0-90° with positive stops at 22.5°, 45°, 67.5°.
  • Indexing pins for quick alignment against the edge of the workpiece for accurate placement.

  • Domino DF 500 Mortise and Tenon Joiner
  • Domino DF 500 Mortise and Tenon Joiner
  • Domino DF 500 Mortise and Tenon Joiner
  • Domino DF 500 Mortise and Tenon Joiner
  • Domino DF 500 Mortise and Tenon Joiner
  • Domino DF 500 Mortise and Tenon Joiner
  • Domino DF 500 Mortise and Tenon Joiner
  • Domino DF 500 Mortise and Tenon Joiner
  • Domino DF 500 Mortise and Tenon Joiner
  • Domino DF 500 Mortise and Tenon Joiner

Additional Purchase Options

574332Domino DF 500 Mortise and Tenon Joiner-
574432Domino DF 500 + Trim and Cross Stops-
PN574332DF 500 + CT MINI HEPA Dust Extractor Package-
PI574332DF 500 + CT MIDI HEPA Dust Extractor Package-
P26574332DF 500 + CT 26 HEPA Dust Extractor Package-
P36574332DF 500 + CT 36 HEPA Dust Extractor Package-
P48574332DF 500 + CT 48 HEPA Dust Extractor Package-
PAC574332DF 500 + CT 36 AutoClean Dust Extractor Package-

Instant savings with package deals!

Festool strongly promotes the importance of dust extraction when working with power tools. For this reason, you can save instantly on the purchase of a Festool Dust Extractor when bundled with a Festool power tool of your choice. Packages not available in some combinations.

Package discounts only available at participating dealers. See dealer for details.

Features & Benefits.

Patented Routing Principle

Patented Routing Principle

The spiral cutter rotates and oscillates to create perfect mortises.

Mortise Width Adjustment

Mortise Width Adjustment

Adjusting the width of the mortise allows for easier alignment when joining panels.

Positioning

Positioning

With an adjustable fence angle, retractable stop flaps, adjustable cutter height with step gauge, and precise mortise depth stop, the Domino joiner enables precise mortise placement and spacing.

Pivoting Fence

Pivoting Fence

Fence creates angled mortises from 0-90° with positive stops at 22.5°, 45°, 67.5°.

Depth Control

Depth Control

Quick, precise adjustment for five different mortising depths, relative to the size of the tenon required for the application.

Stepped Height Stop

Stepped Height Stop

7 different step positions for different material thicknesses for fast and easy fence height adjustment.

Dust Extraction

Dust Extraction

Your mortises are clean and ready for glue when the Domino is used in combination with a dust extractor. Proper dust extraction greatly extends cutter life.

Carbide Tip Spiral Bit

Carbide Tip Spiral Bit

Durable, long-lasting bit withstands 5,000-14,000 joints depending on material.

Rapid Bit Change

Rapid Bit Change

Means you can change a bit in under 30 seconds to match desired tenon size.

Specifications

DO MINO cutter D 5 
Plug-it power cord 
Support bracket 
Wrench 
Systainer 
Cutter spindle speed24,300 rpm
DOMINO slot cutter diameter (5/6/8/10 mm)
Miter routing0-90°; stop positions at 0°, 22.5°, 45°, 67.5°, 90°
Movable stepped stop (16/20/22/25/28/36/40 mm)
Power consumption420 watts
Routing depth stop (12/15/20/25/28 mm)
Routing height adjuster with scale (5-30 mm)
Weight7 lbs. (3.2 kg)

See it in action!

Cantrell Construction

Watch video of Mike Cantrell of Cantrell Construction talking about why the Domino Joiner offers advantages over other types of joinery.

Have a question about this product?

We’re here to help. Feel free to give us a call toll-free at 888-337-8600 or use our contact form and one of our tool application specialists will help answer your questions.

Looking for reviews, opinions or advice?

Visit the Festool Owners Group forum, consisting of over 15,000 international members. The forum is a great place to collaborate with other Festool power tool owners. There's no better online resource of Festool information than the Festool Owners Group.

Festool Owners Group