Detail Sanders

ROTEX RO 90

New!
  • Ultra-versatile sander
  • Random orbital mode
  • Aggressive mode
  • Polishing capability
  • 3.5" round & delta pad
  •  

DTS 400

  • For flat surfaces, corners
  • Virtually dust-free*
  • Vibration-free
  • 5/64" stroke
  • Rounded delta pad
  •  

DX 93

  • For corners, crevices
  • Virtually dust-free*
  • Vibration-free
  • 3/32" stroke
  • 3-5/8" delta pad
  •  

LS 130

  • For profile sanding
  • Various pad profiles
  • Virtually dust-free*
  • 5/32" linear stroke
  • 3-5/32" x 5-1/4" pad
  •  

* When used in conjunction with a Festool CT Dust Extractor.

Benefits of Festool Detail Sanders.

  • Experience virtually dust free sanding when used with a Festool HEPA CT Dust Extractor, because no one likes dust.
  • Choose from a multi-mode sander that can do it all, general purpose sanders or application-specific sanders. We have a sander that's perfect for you.
  • The ROTEX RO 90 DX offers four modes: aggressive sanding, finish sanding, polishing and detail sanding with its interchangeable delta and round pads.
  • The DTS 400 is one smooth operator with an ultra fine stroke for great finishes, even in corners.
  • The Deltex DX 93 can be used for coarse or fine finishes with its triangular pad share and can even sand louvers with the optional extended pad.
  • The LS 130 is like a chameleon, switching between its myriad of pad shapes to match virtually any profile or moulding. The optional custom pad kit allows the LS 130 to adapt to custom and complex trim designs.
  • Enjoy decades of use from a sander that's built to last and backed by a three year warranty.
  • Thermal and overload protection protect the sander from potentially damaging conditions.
  • Quick, easy abrasives and pad changes make every day use simple and convenient.

Extremely Versatile.

The RO 90 DX is the newest addition to Festool's line of ROTEX sanders. It's the only professional sander that sands open spaces as easily as it conquers corners. How do you move seamlessly between rough sanding and final sanding without switching sanders? It is easy when you own a ROTEX multi-mode sander. The design of this multipurpose sander is nothing short of an engineering marvel. Use the aggressive action to quickly and efficiently remove wood, paint, or varnish. Switch to the fine setting for final finishing. Equip your ROTEX with polishing pads, sponges, felts or sheepskin and get astonishing finishes that gleam with brilliance.

With the new RO 90 DX, add the ability to swap the round pad for a delta-shaped pad to reach deep into corners and crevices. Transform rough surfaces with startling power, stripping stubborn paints and other coatings, and making you the master of all materials. The aggressive mode delivers material removal like that of a grinder and makes your belt sander look like a toy. Shaving off hours of sanding, you quickly and easily achieve astonishing results.

ROTEX RO 90 Multi-Mode Detail Sander

DTS 400 Finish Detail Sander.

The DTS 400 sander is truly in a league of its own, a sheer pleasure to use. With a tight 5/64" (2mm) stroke, you'll get a superior finish without swirl marks. Due to the shape of the DTS 400 (triangular), you are able to sand in corners and against edges just as easily as you can on open surfaces. Its lightweight design and superior ergonomics make using the DTS 400 create a zen like experience, even when used for extended periods of time. Virtually dust free sanding when used with a Festool CT Dust Extractor.

Festool DTS Detail Finish Sander

Deltex DX 93 Detail Finish Sander.

When it comes to getting into tight spaces, this sander is the trick. Sharing the same delta (triangular) pad and abrasives shape, the DX 93 can reach into every crevice and corner. Since we know you might tend to lean on the tip of the sander a bit, the pad and abrasives can be rotated 120 degrees for three fresh sanding surfaces prolonging their life. Use the optional extended pad to reach into louvers or slats.

Festool Deltex DX 93 Finish Sander

LS 130 Detail Sander for Profiles and Mouldings.

Festool's Duplex LS 130 EQ linear sander makes detail sanding on simple or complex profiles a breeze. Great for raised panel doors, edge sanding, rabbets, grooves, handrails, trim work, mouldings, or any other irregular shape. These profiles are best sanded by a linear, back and forth, motion. Until now, the only tool that could do that was your hand, and there is no dust extraction when sanding by hand. But the LS 130 linter sander powers through detail sanding faster, more efficiently, and without the fatigue of hand sanding. As common as these jobs are, the LS 130 is sure to provide major savings in time and effort. The optional custom profile kit allows you to match virtually any profile or contour.

Festool LS 130 Detail Finish Sander

See it in action!

Holland Knapp Construction

Watch video of Zach Knapp of Holland & Knapp Construction using Festool sanders and HEPA Dust Extractors to keep a virtually dust-free environment, as well as comply with federal EPA RRP lead paint regulations.

Abrasives Search

Abrasives Search

Find the right abrasives and backing pads for your Festool sander based on your application and other criteria.

Have a question about this product?

We’re here to help. Feel free to give us a call toll-free at 888-337-8600 or use our contact form and one of our tool application specialists will help answer your questions.

Looking for reviews, opinions or advice?

Visit the Festool Owners Group forum, consisting of over 15,000 international members. The forum is a great place to collaborate with other Festool power tool owners. There's no better online resource of Festool information than the Festool Owners Group.

Festool Owners Group