- Please select -
Purchase online

Select an online shop and you will be redirected

{{'Available in {0} online shop'.format(ctrl.counter)}} {{'Available in {0} online shops'.format(ctrl.counter)}}
Local dealers

Find your brick-and-mortar dealer quickly and easily using our dealer search

Go to dealer search

Corner connection KV-LR32 D8/50

NEW
Item number 203168

90,00

Go to dealer search

Includes

KV-LR32 D8/50
  • Split anchor
  • 50x Bolt with Euro thread for drilling series of holes
  • 50x Plastic trays
  • 50x Cross anchor with threaded pin
  • without cover caps
  • Qty. in pack: 50.00 Units
  • in carton

The new DOMINO connectors make knock-down joinery simple and stable. Quickly and easily assemble, separate, and reassemble your work for increased flexibility across a wide range of applications – from corner panel joints to center panel joints to joints between a series of holes. For increased stability, speed, and flexibility.

  • The new DOMINO basic structure connectors and furniture connectors can be positioned simply and universally – in combination with DOMINO or a series of holes.
  • Because of its high tolerance compensation and high stability, the detachable DOMINO jointing system enables seamless assembly and disassembly of a piece of furniture – in the workshop as well as with the customer.
  • All joints are simple and quick to machine using the DOMINO DF 500 joiner. No additional special machine is required.
  • The connectors' large tightening distance and long bolts make furniture assembly significantly easier. Cupboard assembly is therefore no problem, and you can do it easily on your own.
  • Routing and cutting tolerances of up to 1.4 mm are compensated for without problems by the fixture.
  • The clever DOMINO system enables very simple and precise positioning of joints, thereby rendering additional stops and positioning aids unnecessary. For working efficiently and quickly.
  • for 50 corner joints with the DF 500 and drilling series of holes
  • The DOMINO/LR 32 KV-LR 32 D8/50 connector is positioned both in the cupboard panel in a 5 mm hole in the series of holes and the base of the structure with the DOMINO jointer DF 500

Product highlights

  • Finished in just three steps

    With only two DOMINO routed holes and one drilled hole, the corner joint is produced quickly and without additional measurements.

  • Everything like usual

    The center panel joint is produced in the same way as a corner joint. The only difference is that a through hole is made in the center panel with the DOMINO jointer DF 500. The connector is inserted through this hole and the bases of the two structures can then be attached in the usual way.

  • The fast joint

    The new DOMINO basic structure connectors enable a flexible connection between a series of 32 holes and the base of a structure. The fixture is turned directly into the 5 mm hole in the series of holes and anchored in the base of the structure using a DOMINO routed hole. For simple, fast, and precise work.

You might also be interested in

  • Wooden dowels
    DOMINO beech
    DS 4/5/6/8/10 1060x BU D 4x20/450 BU D 5x30/300 BU D 5x30/1800 BU D 6x40/190 BU D 6x40/1140 BU D 8x40/130 BU D 8x40/780 BU D 8x50/100 BU D 8x50/600 BU D 10x50/85 BU D 10x50/510 BU
  • Workplace organisation
    Multifunction table MFT 3
    MFT/3 MFT/3 Basic
  • NEW Connector
    Connector for DOMINO joining machine
    KV D8/50 KV-LR32 D8/50 MSV D8/25 MSV-LR32 D8/25 KV-AK D15 brn/50 KV-AK D15 slr/50 KV-AK D15 wht/50 KV-AK D15 gr/50 BS-KV D15 KVB-HW D15 CE D 8x36/130 BU KV-SYS D8
  1. Excluding sales tax and freight