Finished in just three steps
With only two DOMINO routed holes and one drilled hole, the corner joint is produced quickly and without additional measurements.
Video
360°
Illustrations are examples. Please note the variant and scope of delivery.
KV-AK D15 wht/50
Cover cap
for the DF 500, DF 500 R, DFC 500
Select variant
Compare variants
Product details
Functions
Perfect joinery. Now with even more versatility. The new knock-down DOMINO basic structure connectors and furniture connectors.
The new DOMINO connectors make knock-down joinery simple and stable. Quickly and easily assemble, separate, and reassemble your work for increased flexibility across a wide range of applications – from corner panel joints to center panel joints to joints between a series of holes. For increased stability, speed, and flexibility.
- The new DOMINO basic structure connectors and furniture connectors can be positioned simply and universally – in combination with DOMINO or a series of holes.
- Because of its high tolerance compensation and high stability, the detachable DOMINO jointing system enables seamless assembly and disassembly of a piece of furniture – in the workshop as well as with the customer.
- All joints are simple and quick to machine using the DOMINO DF 500 joiner. No additional special machine is required.
- The connectors' large tightening distance and long bolts make furniture assembly significantly easier. Cupboard assembly is therefore no problem, and you can do it easily on your own.
- Routing and cutting tolerances of up to 1.4 mm are compensated for without problems by the fixture.
- The clever DOMINO system enables very simple and precise positioning of joints, thereby rendering additional stops and positioning aids unnecessary. For working efficiently and quickly.
- used for covering the DOMINO D 8 mm joint fixture
- Color: White
Highlights
The perfect accessories for your craft
Everything like usual
The center panel joint is produced in the same way as a corner joint. The only difference is that a through hole is made in the center panel with the DOMINO jointer DF 500. The connector is inserted through this hole and the bases of the two structures can then be attached in the usual way.
The fast joint
The new DOMINO basic structure connectors enable a flexible connection between a series of 32 holes and the base of a structure. The fixture is turned directly into the 5 mm hole in the series of holes and anchored in the base of the structure using a DOMINO routed hole. For simple, fast, and precise work.
This might also interest you
There is more to discover
MFT/3 Basic
Multifunction Table
D 8x36/130 BU
Beech DOMINO Tenons
KV-SYS D8
DOMINO connector range
KV D8/50
Corner connection
MSV D8/25
Center panel connector
KV-LR32 D8/50
Corner connection
MSV-LR32 D8/25
Center panel connector
SORT-SYS3 M 187 DOMINO
Systainer³
DS 4/5/6/8/10 1060 BU
Beech DOMINO Tenons Assortment
BS-KV D15
Drilling template
QA-DF 500/700
Cross Stop
KV-AK D15 gr/50
Cover cap