Routers

    Routers

    You only have one change to get it right. Get it right.

    Whether trimming laminate, making heavy cuts in hard maple, or putting a decorative edge on solid surface material, our routers surpass the most demanding requirements. But even more surprising is the versatility, accuracy, and ergonomic comfort and control present across the lineup.
    • OF 1010 EQ plunge router

      Ergonomics and precision make this one unbeatable tool. One-handed operation makes it easy to plunge, cut, release, and switch on and off. Its compact design and balanced center of gravity make it effortlessly maneuverable. Click for product details
    • OF 1400 EQ plunge router

      Our most versatile router packs 1400 watts into less than 10 lbs. It’s got enough power for most routing tasks, yet it's small enough to allow precise control. Click for product details
    • OF 2200 EB plunge router

      You might confuse it for a portable shaper. In fact, its our most powerful router, easily capable of plunging into 8/4 hardwoods or making 1/2" grooves in a single pass. It’s easy to control and perfect for jobsite or shop. Click for product details
    • MFK 700 EQ Trim Router

      With its modular design and tool-less base changes, the MFK 700 transforms from a vertical to a horizontal position in a few simple steps. Easily trim laminate and edge band, or rout grooves for inlays, thanks to lightweight maneuverability. Packed with features, this router delivers additional value by allowing the use of bearing-less bits when used with the attachable base feeler bearing. Click for product details
    • MFK 700 EQ/B Edge Router

      The perfect edge demands the perfect finishing touch and the MFK 700 EQ/B helps deliver those results through precision depth control and smooth running operation. Equipped with a ball bearing brake base and variable speed control that help to prevent melting and burning of sensitive materials like PVC and exotic woods. Click for product details
    • Plunge Routers

      OF 1010 EQ OF 1400 EQ OF 2200 EB
      Item No. 574691 574692 574689
      Standard package includes
      Collet - 1/4"  
      Collet - 8 mm  
      Collet - 1/2"  
      Dust Extraction Hood
      Guide Rods  
      Guide Stop    
      Standard U.S. Guide Bushing Adapter
      Plug-It Power Cord  
      SYSTAINER SYS 3 TL SYS 4 TL SYS 4 TL
      Specifications
      Power consumption 1,010 watt 1,400 watt 2,200 watt
      Idle engine speed 10,000 - 23,000 RPM 10,000 - 22,500 RPM 10,000 - 2,000 RPM
      Collet dia. 1/4" - 5/16" (6 - 8 mm) 1/4" - 1/2" (6 - 12.7 mm) 1/4" - 1/2" (6 - 12.7 mm)
      Routing stroke 2-1/8" (55 mm) 2-3/4" (70 mm) 5-5/32" (80 mm)
      Routing depth fine adjustment range 5/16" (8 mm) 5/16" (8 mm) 3/4" (20 mm)
      Max. cutter dia. 2" (50 mm) 2-1/2" (63 mm) 3-1/2" (89 mm)
      Weight 5.95 lbs (2.7 kg) 9.92 lbs (4.5 kg) 17.2 lbs (7.8 kg)
    • Trim/Edge Routers

      MFK 700 EQ Set MFK 700 EQ/B
      Item No. 574368 574456
      Standard package includes
      Collets 1/4" and 8 mm
      Dust Extraction Hood  
      Vertical Base  
      1.5° Horizontal Base  
      Feeler Bearing Set  
      Plug-It Power Cord
      SYSTAINER SYS 2 TL SYS  TL
      Specifications
      Power consumption 720 watt 720 watt
      Idle engine speed 10,000 - 26,000 RPM 10,000 - 26,000 RPM
      Collet dia. 1/4" - 5/16" (6 - 8 mm) 1/4" - 5/16" (6 - 8 mm)
      Routing depth fine adjustment range 1/2" (14 mm) 1/2" (14 mm)
      Max. cutter dia. 1-1/4" (32 mm) 1-1/4" (32 mm)
      Dust extraction connection dia. 1-1/16" (27 mm) 1-1/16" (27 mm)
      Weight 4.19 lbs (1.9 kg) 4.19 lbs (1.9 kg)
    • Router Accessories

      Router Accessories
      Hole Drilling Set
      Includes LR 32 Guide Plate with mandrel (494340), two side fences consisting of edge stop(485758) and sliding stop flag (485759). Packaged in a box. Guide Rail, clamps, and bits sold separately.
      583290
      Guide Plate
      Includes centering mandrel (492187).Guide Rail, clamps, bits, and side fences sold separately.
      494340
      Edge Guide
      Set Guide Rails a specific distance from edge. Integrated ruler and adjustable stops.For use with the LR 32 system. Includes stop and sliding stop flag (485759).
      485758
      Guide Rail Index
      Accurately place shelf pin holes and European hardware based on the 32 mm system using the stop to set the distance from the end. Also used to calibrate LR 32 rails to be joined together for taller workpieces. (2 pieces)
      496938
      Dowel Drill Bit
      Brad-point style bit for stopped holes for shelf pins and hardware installation.
      491066
      Dowel Drill Bit
      Spear-point bit for through holes for shelf pins or hardware installation.
      491064
      Euro-hinge Boring Bit
      35 mm Flat-bottom cutting bit for recessed cup-style hinges.
      491077
      Euro-hinge Boring Bit
      20 mm Flat-bottom cutting bit for recessed cup-style hinges.
      491072
      Guide Rail FS
      LR 32 55" (1,400mm) Guide Rail indexed with a series of holes for 32mm spacing. Hole drilling set sold separately. FS 1400/2 LR32.
      496939
      Guide Rail FS
      LR 32 95-13/32" (2,424mm) Guide Rail indexed with a series of holes for 32mmspacing. Hole drilling set sold separately. FS 2424/2 LR32.
      491622
    • OF 1010 EQ Accessories
      Guide Stop
      Adapt routers to Guide Rails for perfectly guided cuts. Slot in base engages rib on Guide Rail.
      488752
      Fine Adjustment
      Quick and precise adjustment when using router with Guide Stop (488752) or edging plate. Allows for 1/256" (1/10mm) fine adjustment.
      488754
      Edge Guide
      Stable guidance for accurate grooves, flutes, dados, rabbets and more. Includes Guide Rods (495247); does not include Dust Hood (437307).
      489427
      Fine Adjuster
      Quick and precise adjustment when using router with Guide Stop (488 752) or Edging Plate. Allows for 1/256" (1/10 mm) fine adjustment. (Shown attached to Edge Guide (489427), not included)
      483358
      Chip Catcher
      Swiveling Chip Catcher deflects chips and dust in edge-forming operations, further enhancing dust extraction efficiency.
      493180
      Extension Table
      Extends support area for edge trimming. Small center bore facilitates edge and corner routing. Outrigger handle for additional support.
      488756
      Hard Fiber Base Runner
      Customize the solid base piece hole diameter with a plunge bit to meet your needs.Provides support across the entire surface of the router base. Ideal for working with smaller diameter bits especially for greater support on outside corners. Does not have the center bore.
      489229
      Trammel Unit
      Rout circles and decorative curves up to 29-7/8" (760mm) in diameter.
      483922
      Collet  
      1/4" collet with nut 488761
      8mm collet with nut 488755
      Template  
      10.8 mm OD / 9 mm ID 486029
      13.8 mm OD / 11 mm ID 484176
      17 mm OD / 15 mm ID 486030
      24 mm OD / 21 mm ID 486031
      27 mm OD / 25 mm ID 486032
      30 mm OD / 27 mm ID 486033
      40 mm OD / 37 mm ID 486034
    • OF 1400 EQ Accessories
      Guide Stop
      Adapt routers to Guide Rails for perfectly guided cuts. Slot in base engages rib on Guide Rail. Includes Router Support (438 608). Does not include Guide Rods (463147).
      492601
      Edge Guide
      Quickly and easily rout grooves, flutes, dados, ploughs and rabbets with guided precision. Includes Dust Hood (489565). Does not include Guide Rods (463147).
      492636
      Chip Catcher
      Swiveling Chip Catcher deflects chips and dust in edge-forming operations, further enhancing dust extraction efficiency.
      492732
      Base
      Accessory base for use with small diameter edge-forming bits. Provides stability on outside corners by extending the base to the inside near the bit.
      492574
      Table Widener
      Oversized, heavy-duty base plate with integrated rotating chip catcher. Increased hole diameter size for larger edge-forming bits. Increased base width for greater support. Aids starting and finishing cuts with extended base surface.
      493233
      Collet  
      1/4" collet with nut 494463
      3/8" collet with nut 494464
      8 mm collet with nut 494460
      1/2" collet with nut 494465
      Template  
      24 mm OD / 21 mm ID 492183
      27 mm OD / 25 mm ID 492184
      30 mm OD / 27 mm ID 492185
      40 mm OD / 37 mm ID 492186
    • OF 2200 EB Accessories
      Accessory Kit
      Includes SYS 2 TL (497564), Parallel Edge Guide (494680), Guide Rail Base Kit (Base and Stop—494681), Guide Rods (495247), Table Widener Base (494682), Small Bore Base(494677), Template Guide Base (494675), Imperial Template Guide Bushings (1/2," 3/4," 1,"1-3/8") (495339, 495340, 495341, 495342).
      497656
      Accessory Kit
      Includes same as above but with Metric Template Guide Bushing (17, 24, 27, 40mm)(494622, 494623, 494624, 494626).
      497655
      Guide Stop
      Includes Guide Stop and accessory offset baseplate for use with OF 2200 and FS Guide Rails. Guide Rods (495 247) not included.
      494681
      Edge Guide
      Create grooves, flutes, dados, ploughs and rabbets by accurately guiding the router. Does not include Dust Hood (489565) or Guide Rods (495247).
      494680
      Rod
      Attach Edge Guides or Guide Stops to routers. (2 pieces)
      495247
      Base
      Uniform base support surface with dust extraction channels for use with template guide bushings.
      494675
      Base
      Accessory base for use with small diameter edge-forming bits. Provides stability on outside corners by extending the base to the inside near the bit.
      494677
      Table Widener
      Oversized, heavy-duty base plate with integrated rotating chip catcher. Increased hole diameter size for larger edge-forming bits. Increased base width for greater support. Aids starting and finishing cuts with extended base surface.
      494682
      Collet  
      3/8" collet with nut 494464
      8 mm collet with nut 494460
      1/2" collet with nut 494465
      Template  
      17 mm OD / 15 mm ID 492183
      30 mm OD / 27 mm ID 492185
    Manuals & Downloads